X-Ray and Gamma Detector Systems

The XR-100CR

The XR-100CR is a new high performance x-ray detector, preamplifier, and cooler system using a thermoelectrically cooled Si-PIN photodiode as an xray detector. Also mounted on the 2-stage cooler are the input FET and a novel feedback circuit. These components are kept at approximately -55 °C, and are monitored by an internal temperature sensor. The hermetic TO-8 package of the detector has a light tight, vacuum tight thin Beryllium window to enable soft xray detection. The XR-100T-CdTe represents a breakthrough in xray detector technology by providing “off-the-shelf” performance previously available only from expensive cryogenically cooled systems. The XR-100-CdTe is also suited for measuring gamma rays.

XR-100CR Si-PIN X-Ray Detector

Model Description Datasheet
XR-100CR X-Ray Detector with Si-PIN, 1 mil Be window (6 mm2/500 µm, 13 mm2/500 µm, 25 mm2/500 µm) xr100cr.pdf
XR-100CR X-Ray Detector with Si-PIN, 0.5 mil Be window (only available with the 6 mm2/500 µm detector) xr100cr.pdf
PX5 Digital Pulse Processor, MCA, and Power Supply for use with the XR-100CR px5.pdf

XR-100SDD Silicon Drift X-Ray Detector

Model Description Datasheet
XR-100SDD X-Ray Detector with Super Silicon Drift Detector (SDD), 0.5 mil Be window, 25 mm2/500 µm sdd.pdf
AXRSDD/PA210SDD option 0.5 mil Be window for XR100CR sdd.pdf
AXRSDD/PA230SDD X-Ray Si-Drift Det. 25mm2, 500µm, 0.5mil Be-window sdd.pdf
PX5 Digital Pulse Processor, MCA, and Power Supply for use with the XR-100SDD px5.pdf

XR-100T-CdTe X-Ray and Gamma Ray Detector

Model Description Datasheet
XR-100T-CdTe X-Ray and Gamma Ray Detector with Cadmium Telluride (CdTe) 3x3x1 mm3; 4 mil Be cdte.pdf
XR-100T-CdTe X-Ray and Gamma Ray Detector with Cadmium Telluride (CdTe) 5x5x1 mm3; 4 mil Be cdte.pdf
PX5 Digital Pulse Processor, MCA, and Power Supply for use with the XR-100T-CdTe px5.pdf

X-123, X-123CdTe, X-123SDD Complete X-Ray and Gamma Ray Spectrometer

Model Description Datasheet
X-123 Complete Spectrometer (Si-PIN 6mm2 or 13mm2 or 25mm2 /500 µm/ with 1 mil Be) x123.pdf
X-123 Complete Spectrometer (Si-PIN with 0.5 mil Be) (only available with the 6 mm2/500 µm detector) x123.pdf
X-123CdTe Complete Spectrometer (3x3x1 mm3 CdTe, 4 mil Be window) x123.pdf
X-123CdTe Complete Spectrometer (5x5x1 mm3 CdTe, 4 mil Be window) x123.pdf
X-123SDD Complete Spectrometer with Silicon Drift Detector (SDD 25 mm2/500 μm, 0.5 mil Be window) x123.pdf

XR-100 and X-123 Accessories

Model Description Datasheet
EXVC Collimator Kit for Medical or High Countrate Applications, EXV5, or EXV9 collkit.pdf
EXVC-W-Spacer Tungsten (W) spacer/collimator for high energy X-rays above 150 keV, 35mm thick/300µm hole collkit.pdf
EXVC-Long Long version of EXVC Collimator Kit, can accomodate up to 3 EXVC-W SPACERs ordered separately collkit.pdf
EXV5 5 inch detector vacuum extension for the XR-100 or X-123 vacuum.pdf
EXV9 9 inch detector vacuum extension for the XR-100 or X-123 vacuum.pdf
CP75 Vacuum feedthrough coupling on 2.75" SS Conflat (for use with EXV5/9) vacuum.pdf
9DVF 9 Pin D-Vacuum Feedthrough Connector on a 2.75" SS Conflat vacuum.pdf
TF3 3 foot vacuum cable (XR-100 to 9DVF) vacuum.pdf
CF5 5 foot, 9 Pin D extension cable (9DVF to PX2) vacuum.pdf

X-Ray Sources

Model Description Datasheet
CoolX X-Ray Generator with Pyroelectric Crystal coolx.pdf
Mini-X-Ag Miniature X-Ray Tube and Controller with Silver (Ag) Target minix.pdf
Mini-X-Au Miniature X-Ray Tube and Controller with Gold (Au) Target minix.pdf

Software

Model Description Datasheet
XRF-FP Quantitative Analysis Software for X-Ray Fluorescence (for use with detectors and electronics) xrffp.pdf

Digital Pulse Processors

Model Description Datasheet
DP5 Digital Pulse Processor dp5.pdf
PC5 XR100 Power Board for use with the DP5
PX5 Digital Pulse Processor, MCA, and Power Supply for use with all detectors and detectors px5.pdf
PX5 Digital I/O PX5 Digital I/O 15-Pin Breakout Cable