The 59xx series has been released end of 2017 and was a compete new design from scratch with a lot of improvements. The series offers best performance and a lot of features. It is a replacement for several older cards with 12 bit, 14 bit and 16 bit resolution. But there are also some outstanding new features build in. The analog inputs can be switched by software command between single-ended and true differential (each two single-ended inputs become one true differential input).
The powerful digital input option allows for the first time to build mixed mode systems with 16 bit analog resolution. The digital inputs are fully software programmable and can be placed either into the data of an analog channel, reducing the analog resolution to 14 bit (2 digital channels) or to 12 bit (4 digital channels) or 16 digital channels can replace one analog channel completely.
High Performance Medium Speed 16 Bit Digitizer
5, 20, 40 MS/s, 80 MS/s or 125 MS/s with 16 bit ADc resolution
Software selectable single-ended and true differential inputs
1 up to 8 simultaneous channels
6 input ranges
Up to 60 MHz bandwidth
Programmable input offset of ±100%
FIFO mode included
Fast repetition rate in segmentation mode
The M2p.59xx series allows recording of up to eight single-ended channels or up to four differential channels both with sampling rates of up to 125 MS/s. These PCI Express cards offer outstanding A/D features both in resolution and speed. The cards can be switched between single-ended inputs with a programmable offset and true differential inputs. If used in differential mode each two inputs are connected together reducing the number of available channels by half. The 16 bit vertical resolution have four times the accuracy compared to 14 bit cards and sixteen times the accuracy if compared with a 12 bit card. All boards of the M2p.59xx series may use the whole installed on-board memory of up to 512 MSamples completely for the currently activated number of channels