M2i.31XX - 8-Channel, up to 25 MS/s, 12 bit, PCI-based Transientrecorders

The M2i.31xx series allows recording of two, four or eight channels with sampling rates of 1 MS/s, 10 MS/s or 25 MS/s. Due to the proven design a wide variety of 12 bit A/D converter boards for PCI/PCI-X bus can be offered.

These boards are available in se-veral versions and different speed grades making it possible for the user to find an individual solution.As an option 4 digital inputs per channel can be re-corded synchronously. The installed memory of up to 2 GSample will be used for fast data recording. It can be used completely by the currently active channels. If using slower sampling rates the memory is switched to a FIFO buffer and data will be transferred on-line to the PC memory or to hard disk.

  • Completely new developed base card
  • 4 GByte memory with one slot width
  • Optimized low jitter clock section
  • Multi, Gate with programmable pre, posttrigger and timestamp
  • Zero phase delay synchronization
  • AND/OR conjunction of trigger/gate
  • PCI-X interface (100% compatible to PCI)
  • Multichannel 12 bit A/D converter board
  • Up to 25 MS/s on one, two or four channels
  • Separate ADC and Amplifier per channel
  • Simultaneous sampling on all channels
  • 8 input ranges: ±50 mV up to ± 10 V
  • 64 MB on-board memory expandable to 4 GB
  • Sustained streaming mode to 200 MB/s
  • Window, pulse-width, re-arm, OR/AND trigger
  • Programmable input offset up-to +/- 100%
  • Synchronization option for up-to 16 boards
  • ABA mode option: combination of data logging and digitizing on trigger
  • Software support for Windows and LINUX
  • Automation
  • OEM-Applications
  • Quality control
  • Automotive
  • ATE

Product range overview 
All four cards of the M2i.31xx series may use the whole installed on-board memory completely for the currently activated number of channels. See details in datasheet

12 bit A/D converter with up to 25 MS/s and up to 8 channels, memory 32 MS (64 MB), PCI-Bus

Model M2i.31xx Resolution 1ch 2ch 4ch 8ch Input Level Datasheet
M2i.3110 12 bit 1MS 1MS Input: ±(50mV ... 10V) M2i-31.pdf
M2i.3111 12 bit 1MS 1MS 1MS Input: ±(50mV ... 10V) M2i-31.pdf
M2i.3112 12 bit 1MS 1MS 1MS 1MS Input: ±(50mV ... 10V) M2i-31.pdf
M2i.3120 12 bit 10MS 10MS Input: ±(50mV ... 10V) M2i-31.pdf
M2i.3121 12 bit 10MS 10MS 10MS Input: ±(50mV ... 10V) M2i-31.pdf
M2i.3122 12 bit 10MS 10MS 10MS 10MS Input: ±(50mV ... 10V M2i-31.pdf
M2i.3130 12 bit 25MS 25MS Input: ±(50mV ... 10V) M2i-31.pdf
M2i.3131 12 bit 25MS 25MS 25MS Input: ±(50mV ... 10V) M2i-31.pdf
M2i.3132 12 bit 25MS 25MS 25MS 25MS Input: ±(50mV ... 10V) M2i-31.pdf