M2i.31XX - 8-Channel, up to 25 MS/s, 12 bit, PCI-based Transientrecorders
Features
| |
 |
- PCI-X interface (100% compatible to PCI)
- Multichannel 12 bit A/D converter board
- Up to 25 MS/s on one, two or four channels
- Separate ADC and Amplifier per channel
- Simultaneous sampling on all channels
- 8 input ranges: ±50 mV up to ± 10 V
- 64 MB on-board memory expandable to 4 GB
- Sustained streaming mode to 200 MB/s
- Window, pulse-width, re-arm, OR/AND trigger
- Programmable input offset up-to +/- 100%
- Synchronization option for up-to 16 boards
- ABA mode option: combination of data logging and digitizing on trigger
- Software support for Windows and LINUX
Description
The M2i.31xx series allows recording of two, four or eight channels with sampling rates of 1 MS/s, 10 MS/s or 25 MS/s. Due to the proven design a wide variety of 12 bit
A/D converter boards for PCI/PCI-X bus can be offered.
These boards are available in se-veral versions and different speed grades making it possible for the user to find an individual solution.As an option 4 digital inputs per channel can be re-corded synchronously. The installed memory of up to 2 GSample will be used for fast data recording. It can be used completely by the currently active channels. If
using slower sampling rates the memory is switched to a FIFO buffer and data will be transferred on-line to the PC memory or to hard disk.
- Completely new developed base card
- 4 GByte memory with one slot width
- Optimized low jitter clock section
- Multi, Gate with programmable pre, posttrigger and timestamp
- Zero phase delay synchronization
- AND/OR conjunction of trigger/gate
Applications