The Worldwide Leader in Photon and Ion Counting Technologies![]() |
The XR-100CR
The XR-100CR is a new high performance x-ray detector, preamplifier, and cooler system using a thermoelectrically cooled Si-PIN photodiode as an xray detector. Also mounted on the 2-stage cooler are the input FET and a novel feedback circuit. These components are kept at approximately -55 °C, and are monitored by an internal temperature sensor. The hermetic TO-8 package of the detector has a light tight, vacuum tight thin Beryllium window to enable soft xray detection. The XR-100T-CdTe represents a breakthrough in xray detector technology by providing “off-the-shelf” performance previously available only from expensive cryogenically cooled systems. The XR-100-CdTe is also suited for measuring gamma rays
Product Tables for X-Ray and Gamma Detector Systems
| X-Ray and Gamma Detector Systems from AMPTEK | ||
| Model | Description | Datasheet |
| XR-100CR-7-300 | X-Ray Si-PIN Det. 7mm2, 300um, 1mil Be-window (185eV,215eV,250eV @ 20µs,12µs,6µs) | xr100cr.pdf |
| XR-100CR-5-500 | X-Ray Si-PIN Det. 5mm2, 500µm, 1mil Be-window (175eV,185eV,210eV @ 20µs,12µs,6µs) | xr100cr.pdf |
| XR-100CR-5-680 | X-Ray Si-PIN Det. 5mm2, 680µm, 1mil Be-window (175eV,185eV,210eV @ 20µs,12µs,6µs) | xr100cr.pdf |
| XR-100CR-6-500 | X-Ray Si-PIN Det. 6mm2, 500µm, 1mil Be-window (175eV,175eV,210eV @ 20µs,12µs,6µs) | xr100cr.pdf |
| XR-100CR-13-500 | X-Ray Si-PIN Det. 13mm2, 500µm, 1mil Be-window (200eV,220eV,240eV @ 20µs,12µs,6µs) | xr100cr.pdf |
| XR-100CR-20-680 | X-Ray Si-PIN Det. 20mm2, 680µm, 1mil Be-window (240eV @ 20µs) | xr100cr.pdf |
| XR-100CR-25-500 | X-Ray Si-PIN Det. 25mm2, 500µm, 1mil Be-window (240eV @ 20µs) | xr100cr5.pdf |
| XR-100CR-7-1000 | X-Ray Si-PIN Det. 7mm2, 1000µm (185eV @ 32µs) | xr100cr7.pdf |
| 0,5mil Be-window | option, instead 1 mil | |
| PX2CR-12µs | Powersupply and Amplifier for XR-100CR, Time constant 12 µs | xr100cr.pdf |
| PX2CR-20µs | Powersupply and Amplifier for XR-100CR, Time constant 20 µs, | xr100cr.pdf |
| PX2CR-6µs | Powersupply and Amplifier for XR-100CR, Time constant 6 µs | xr100cr.pdf |
| PX4 | Digital Pulse Processor, MCA, and Power Supply for XR-100CR | px4.pdf |
| XR-100T-CdTe | X-Ray/Gamma Detector Cadmium Telluride 3x3x1mm, 4 mil Be | cdte.pdf |
| XR-100T-CdTe-Stack | X-Ray/Gamma Detector Cadmium Telluride 5x5x2,25mm, 4 or 10mil Be | stack.pdf |
| XR-100T-CdTe-Stack-Ext | Option extender 1,5" for XR-100T-CdTe Stack (for colli kit ) | stack.pdf |
| PX2T-CdTe | Powersupply and Amplifier for XR-100T-CdTe | cdte.pdf |
| X-123 | Complete X-Ray spectrometer (specify detector) | x123.pdf |
| X-123-0.5 | Option 0.5 µ Be window for X123 | x123.pdf |
| EXVC | collimator kit for the XR-100 (standard box 1-5" extender) | collkit.pdf |
| EXV9 | 9 inch detector vacuum extension for XR100 | vacuum.pdf |
| CP75 | Feedthrough coupling on 2 3/4 inch SS Conflat (for use with EXV9) | vacuum.pdf |
| 9DVF | 9-pin D-Vacuum Feedthrough Connector on a 2 3/4 inch SS Conflat | vacuum.pdf |
| TF3 | 3 foot vacuum cable (XR100 to 9DVF) | vacuum.pdf |
| CF5 | 5 foot, 9-pin D extension cable (9DVF to PX2) | vacuum.pdf |
| MCA-8000A | Pocket MCA", 16k ADC, 16k Memory, software | mca8000.pdf |
| MCA-8000A +Opt.PA | Pocket MCA", 16k ADC, 16k Mem, SW, NIST trc. Calibration & certificate | mca8000.pdf |
| XRF-FP | Quantitative Analysis Software for X-Ray Fluorescence (for use with MCA8000A) | xrffp.pdf |
| DP4 | Digital Pulse processor | dp4.pdf |
| PC4-1 | Connector Board | |
| PC4-2 | DP4 Power Board | |
| PC4-3 | DP4 and XR100 Power Board | |
| A206 | Pulse Amplifier and Discriminator | a203_6.pdf |
| MD-501 | AMPTEKTRON CEM Channel-Electron-Multiplier | |
| MD-502 | AMPTEKTRON CEM Channel-Electron-Multiplier for ultra high vacuum use | |
| ECLIPSEIII | X-Ray Tube System with HV and Controller, Transmission Target E3T | eclipse.pdf |
| CoolX | Miniature X-ray generator with pyroelectric crystal | coolx.pdf |
| Top top |
||