The XR-100CR is a new high performance x-ray detector, preamplifier, and cooler system using a thermoelectrically cooled Si-PIN photodiode as an xray detector. Also mounted on the 2-stage cooler are the input FET and a novel feedback circuit. These components are kept at approximately -55 °C, and are monitored by an internal temperature sensor. The hermetic TO-8 package of the detector has a light tight, vacuum tight thin Beryllium window to enable soft xray detection. The XR-100T-CdTe represents a breakthrough in xray detector technology by providing “off-the-shelf” performance previously available only from expensive cryogenically cooled systems. The XR-100-CdTe is also suited for measuring gamma rays
| X-Ray and Gamma Detector Systems from AMPTEK |
| Model |
Description |
Datasheet |
| XR-100CR-7-300 |
X-Ray Si-PIN Det. 7mm2, 300um, 1mil Be-window (185eV,215eV,250eV @ 20µs,12µs,6µs) |
xr100cr.pdf |
| XR-100CR-5-500 |
X-Ray Si-PIN Det. 5mm2, 500µm, 1mil Be-window (175eV,185eV,210eV @ 20µs,12µs,6µs) |
xr100cr.pdf |
| XR-100CR-5-680 |
X-Ray Si-PIN Det. 5mm2, 680µm, 1mil Be-window (175eV,185eV,210eV @ 20µs,12µs,6µs) |
xr100cr.pdf |
| XR-100CR-6-500 |
X-Ray Si-PIN Det. 6mm2, 500µm, 1mil Be-window (175eV,175eV,210eV @ 20µs,12µs,6µs) |
xr100cr.pdf |
| XR-100CR-13-500 |
X-Ray Si-PIN Det. 13mm2, 500µm, 1mil Be-window (200eV,220eV,240eV @ 20µs,12µs,6µs) |
xr100cr.pdf |
| XR-100CR-20-680 |
X-Ray Si-PIN Det. 20mm2, 680µm, 1mil Be-window (240eV @ 20µs) |
xr100cr.pdf |
| XR-100CR-25-500 |
X-Ray Si-PIN Det. 25mm2, 500µm, 1mil Be-window (240eV @ 20µs) |
xr100cr5.pdf |
| XR-100CR-7-1000 |
X-Ray Si-PIN Det. 7mm2, 1000µm (185eV @ 32µs) |
xr100cr7.pdf |
| 0,5mil Be-window |
option, instead 1 mil |
|
| PX2CR-12µs |
Powersupply and Amplifier for XR-100CR, Time constant 12 µs |
xr100cr.pdf |
| PX2CR-20µs |
Powersupply and Amplifier for XR-100CR, Time constant 20 µs, |
xr100cr.pdf |
| PX2CR-6µs |
Powersupply and Amplifier for XR-100CR, Time constant 6 µs |
xr100cr.pdf |
| PX4 |
Digital Pulse Processor, MCA, and Power Supply for XR-100CR |
px4.pdf |
| XR-100T-CdTe |
X-Ray/Gamma Detector Cadmium Telluride 3x3x1mm, 4 mil Be |
cdte.pdf |
| XR-100T-CdTe-Stack |
X-Ray/Gamma Detector Cadmium Telluride 5x5x2,25mm, 4 or 10mil Be |
stack.pdf |
| XR-100T-CdTe-Stack-Ext |
Option extender 1,5" for XR-100T-CdTe Stack (for colli kit ) |
stack.pdf |
| PX2T-CdTe |
Powersupply and Amplifier for XR-100T-CdTe |
cdte.pdf |
| X-123 |
Complete X-Ray spectrometer (specify detector) |
x123.pdf |
| X-123-0.5 |
Option 0.5 µ Be window for X123 |
x123.pdf |
| EXVC |
collimator kit for the XR-100 (standard box 1-5" extender) |
collkit.pdf |
| EXV9 |
9 inch detector vacuum extension for XR100 |
vacuum.pdf |
| CP75 |
Feedthrough coupling on 2 3/4 inch SS Conflat (for use with EXV9) |
vacuum.pdf |
| 9DVF |
9-pin D-Vacuum Feedthrough Connector on a 2 3/4 inch SS Conflat |
vacuum.pdf |
| TF3 |
3 foot vacuum cable (XR100 to 9DVF) |
vacuum.pdf |
| CF5 |
5 foot, 9-pin D extension cable (9DVF to PX2) |
vacuum.pdf |
| MCA-8000A |
Pocket MCA", 16k ADC, 16k Memory, software |
mca8000.pdf |
| MCA-8000A +Opt.PA |
Pocket MCA", 16k ADC, 16k Mem, SW, NIST trc. Calibration & certificate |
mca8000.pdf |
| XRF-FP |
Quantitative Analysis Software for X-Ray Fluorescence (for use with MCA8000A) |
xrffp.pdf |
| DP4 |
Digital Pulse processor |
dp4.pdf |
| PC4-1 |
Connector Board |
|
| PC4-2 |
DP4 Power Board |
|
| PC4-3 |
DP4 and XR100 Power Board |
|
| A206 |
Pulse Amplifier and Discriminator |
a203_6.pdf |
| MD-501 |
AMPTEKTRON CEM Channel-Electron-Multiplier |
|
| MD-502 |
AMPTEKTRON CEM Channel-Electron-Multiplier for ultra high vacuum use |
|
| ECLIPSEIII |
X-Ray Tube System with HV and Controller, Transmission Target E3T |
eclipse.pdf |
| CoolX |
Miniature X-ray generator with pyroelectric crystal |
coolx.pdf |
Top top  |
