M2i.40XX - 4-Channel, up to 50 MS/s, 14 bit, PCI-based Transientrecorders
|
Features:
- PCI-X interface (100% compatible to PCI)
- Fastest 14 bit A/D converter board
- Up to 50 MS/s on one, two or four channels
- Separate ADC and Amplifier per channel
- Simultaneous sampling on all channels
- 6 input ranges: ±200 mV up to ± 10 V
- 64 MB on-board memory expandable to 4 GB
- Sustained streaming mode to 200 MB/s
- Window, pulse-width, re-arm, OR/AND trigger
- Programmable input offset up-to +/- 200%
- Synchronization option for up-to 16 boards
- ABA mode option: combination of data logging and digitizing on trigger
- Software support for Windows and LINUX
Description:
The M2i.40xx series is best suitable for applications that need high sampling rates as well as a maximum signal dynamic. These boards offer a resolution four times higher than 12 bit boards. On the M2i.40xx every channel has its own amplifier and A/D converter. Each input channel can be adapted to a wide variety of signal sources. This is done by software selecting a matching input range, an input impedance and an individual input offset compensation. The user will easily find a matching solution from the six offered models. These versions are working with sampling rates of 20MS/s or 50 MS/s and have one, two or four channels. They can also be updated to a multichannel system using the synchronization option. Data is written in the internal 32 MSample up to 2GSample large memory. This memory can also be used as a FIFO buffer. In FIFO mode data can be transferred on-line directly into the PC RAM or to hard disk.
- Completely new developed base card
- 4 GByte memory with one slot width
- Optimized low jitter clock section
- Multi, Gate with programmable pre,
- posttrigger and timestamp
- Zero phase delay synchronization
- AND/OR conjunction of trigger/gate
Applications:
- LDA/PDA
- Production Test
- Spectroscopy
- Laboratory equipment
- RADAR / SONAR
- Military
- Automotive
- Test of mobile communication
- Medical equipment
Product range overview
All four cards of the M2i.40xx series may use the whole installed on-board memory completely for the currently activated number of channels. See details in datasheet.
