 |
 |
Model TA1800 Fast Pulse/Timing Preamplifier |
|
|
FEATURES
Small signal bandwidth DC … 1800MHz
Voltage gain 20dB (x10)
DC coupling
Closed loop OP-Amp design
Low noise
High output drive
Single supply operation / internally generated bipolar supply / internal supply regulation
APPLICATIONS
Pre-amp for ultra fast detectors (MCP, PMT, …)
Oscilloscope and transient recorder pre-amp
Photon-/Ion- counting
Wideband signal processing
DESCRIPTION
The TA1800 is a fast pulse preamplifier with a small signal bandwidth of 1.8GHz. A unique feature for such high speed amplifiers is the DC coupling. DC coupling avoids count rate effects due to non DC balanced pulse trains and the corresponding coupling capacitor charging. A test with a 30mVP-P pulse and a P7889 100ps TOF analyzer showed an improvement of 10…15% in peak width (FWHM) when a TA1800 was used for amplification of the small pulse signal.
SPECIFICATIONS
Voltage gain: 20 dB / x10, non inverting
Input: BNC, 50 Ohm, DC coupled
Outputs: BNC, low impedance, DC coupled
VOUT = +/- 1.3V max, IOUT = +/- 150mA max.
Small signal bandwidth: 1800 MHz, VOUT = 200mVRMS
Full power bandwidth: 1500 MHz, VOUT = 2VP-P
Slew rate: 5500 V/μs (2V step)
Input offset voltage: 5.25mV max., +/- 20 μV/°C typ.
Input referred noise: 2.5 nV/√Hz
Housing:
Case: extruded aluminium sheath, Al Mg Si 0.5
Lid: die cast, GD-Al Si 12
Size: 65/101 x 60 x 35 mm
Weight: 124 g
Power Requirements:
Connector: 2.1 mm center pin
Supply Voltage: nominal +12V
voltage range +10 … +18V
Supply Power: 2.5W
Inverse polarity protection
Absolute maximum ratings:
Supply: 25V (100ms max.)
Signal input: +/- 2.5V
ESD rating: 3000V HBM, 200V MM
|
 |
| ||
 | |  |