These robust desk top high voltage power supplies consist of the THQ housing and one or two high voltage modules of the DPS series which have an unsurpassed price/performance ratio.
The units are available with one or two high voltage modules. Special versions with any combination of DPR modules can be quoted on request. The output voltage is controlled by a frontpanel potentiometer.
For external control and monitoring an analog I/O is also available (set voltage and monitor voltage 0 to 5 V) on a D Sub 9 connector on the rear panel. Hardware settings for voltage and current limits protect the connected devices.
Our patented resonance mode principle and the metal/plastic box guarantees lowest EMI. Output voltage and current can be choosen on a switchable LED-display.
The DPS series includes HV power supply modules with output voltages from 1 kV to 6 kV at max. 12W. The polarity switch in the housing of the DPS module enables the user to set the desired polarity.

• Single and Dual HV supplies in benchtop case
• Low cost desk top HV PS with 1 or 2 channels
• LED display 3 1/2 digits for voltage or current, switchable
• Equipped with DPS HV modules
• Output voltages 1 kV up to 6 kV at max. 12 Watts
• Very low EMI
• High precision output voltage with very low ripple and noise
• Short circuit and overload protected
• Continuous setting of HV over full range with 10 turn Helipot or by Analog I/O on 9 pin D Sub connector.
• Access to manual polarity switch on DPR module, optionally switchable via TTL signal (up to 3 KV only)
• Freely configurable with one or two DPS modules