The worlds most innovative manufacturer of ultra fast counting systems

printed at  25.07.2008
www.fastcomtec.com

Model THQ-T1DPxx and THQ-T2DPxx, Benchtop High Voltage Power Supplies




 Check the product tables for further information!

 THQ T1DPxx and T2DPxx: Single and dual channel versions in benchtop case

 
 Model  DP01  DP02  DP03  DP04  DP05  DP06
 Output voltage Vo  1kV  2kV  3 kV  4kV  5kV  6kV
 Stability ΔVin
 < 1 x 10-5 x Vomax
 Stability ΔRload
 < 5 x 10-5 x Vomax
 Ripple and noise
 typ. 2 mVp-p max. 7 mVp-p
 Temp. coefficient
 < 5 x 10-5/K
 Remote control
 Control and monitor voltage for Vo and Io : 0 to 5 V
 INHIBIT
 TTL-Level, LOW = active Δ Vo = 0
 Polarity
 positive or negative, switchable
 Protection
 overload and shortcircuit, voltage and current limit with trimmer potentiometer
 Case
 Metal box
 Dimension (L/W/H)
 (300 with SHV / 310 / 90) mm
 Supply voltage
 110-240V AC, 50/60 Hz

 Configuration Table and Ordering Information

 Model  Desciption  Order No.
 T1DP01  1 x 1 kV  HVIC01
 T1DP02  1 x 2 kV  HVIC02
 T1DP03  1 x 3 kV  HVIC03
 T1DP04  1 x 4 kV  HVIC04
 T1DP05  1 x 5 kV  HVIC05
 T1DP06  1 x 6 kV  HVIC06
 
 T2DP11  2 x 1 kV  HVIC11
 T2DP22  2 x 2 kV  HVIC22
 T2DP33  2 x 3 kV  HVIC33
 T2DP44  2 x 4 kV  HVIC44
 T2DP55  2 x 5 kV  HVIC55
T2DP66  2 x 6 kV  HVIC66

Features

Description

These robust desk top high voltage power supplies consist of the THQ housing and one or two high voltage modules of the DPS series which have an unsurpassed price/performance ratio.
The units are available with one or two high voltage modules. Special versions with any combination of DPR modules can be quoted on request. The output voltage is controlled by a frontpanel potentiometer.
For external control and monitoring an analog I/O is also available (set voltage and monitor voltage 0 to 5 V) on a D Sub 9 connector on the rear panel. Hardware settings for voltage and current limits protect the connected devices.
Our patented resonance mode principle and the allmetal box guarantees lowest EMI. Output voltage and current can be choosen on a switchable LED-display.
The DPS series includes HV power supply modules with output voltages from 1 kV to 6 kV at max. 12W. The polarity switch in the housing of the DPS module enables the user to set the desired polarity.