|
 |
| ||||||
 | |  | |  | |  |
FAST ComTec's High Voltage power supplies
FAST ComTec is offering a line of High Voltage power supplies in 1/12 NIM, Rack- and table top versions.
They can be ordered in 1 channel and 2 channel versions at equal dimensions.
LCD display for voltage or current are standard. The resolution for current- and voltage measurements of this the NHQ module is 1 µA and 1V.
For the SHQ version the current resolution is 1nA, opt. 100pA, Voltage resolution is 100mV, up to 4 KV opt. 10mV
Variable rate of change of output voltage (HV-ramp) protects sensitive front end stages of preamplifiers etc.
Switchable polarity is a feature of most models - the polarity is indicated on a frontpanel LED. Integrated protection and control circuits prevent damage to the HV supply. The HV-output is overload and short circuit protected
SHV connector on rear side (up to 6 kV), LEMO for higher voltages. The HV supplies can be remote controlled via RS232 (opt. CAN) or analogue voltages.
Series NHQ: NIM HV-Supplies |
||||||||
|---|---|---|---|---|---|---|---|---|
| NHQ1xx: Single channel versions | ||||||||
| Model | Output Voltage |
Outp. Current pro channel |
Ripple and Noise max. | LCD res. current |
LCD res. voltage |
Power req +/- 24V |
Power req +/- 6V |
Datasheet |
| NHQ 102M | 0 .. 2 kV | 0 .. 6 mA | < 2 mV pp | 1 µA | 1 V | < 400 mA | < 100 mA | NHQ1xx.pdf |
| NHQ 103M | 0 .. 3 kV | 0 .. 4 mA | < 2 mV pp | 1 µA | 1 V | < 400 mA | < 100 mA | NHQ1xx.pdf |
| NHQ 104M | 0 .. 4 kV | 0 .. 3 mA | < 2 mV pp | 1 µA | 1 V | < 400 mA | < 100 mA | NHQ1xx.pdf |
| NHQ 105M | 0 .. 5 kV | 0 .. 2 mA | < 5 mV pp | 1 µA | 1 V | < 400 mA | < 100 mA | NHQ1xx.pdf |
| NHQ 106L | 0 .. 6 kV | 0 .. 1 mA | < 5 mV pp | 1 µA | 1 V | < 400 mA | < 100 mA | NHQ1xx.pdf |
| NHQ2xx: Dual HV supplies in single NIM packages | ||||||||
| Model | Output Voltage |
Outp. Current pro channel |
Ripple and Noise max. | LCD res. current |
LCD res. voltage |
Power req +/- 24V |
Power req +/- 6V |
Datasheet |
| NHQ 202M | 0 .. 2 kV | 0 .. 6 mA | < 2 mV pp | 1 µA | 1 V | < 800 mA | < 100 mA | NHQ2xx.pdf |
| NHQ 203M | 0 .. 3 kV | 0 .. 4 mA | < 2 mV pp | 1 µA | 1 V | < 800 mA | < 100 mA | NHQ2xx.pdf |
| NHQ 204M | 0 .. 4 kV | 0 .. 3 mA | < 2 mV pp | 1 µA | 1 V | < 800 mA | < 100 mA | NHQ2xx.pdf |
| NHQ 205M | 0 .. 5 kV | 0 .. 2 mA | < 5 mV pp | 1 µA | 1 V | < 800 mA | < 100 mA | NHQ2xx.pdf |
| NHQ 206L | 0 .. 6 kV | 0 .. 1 mA | < 5 mV pp | 1 µA | 1 V | < 800 mA | < 100 mA | NHQ2xx.pdf |
| Options | Datasheet | |||||||
| HVC | Control Software RS232 | dllhvc.pdf | ||||||
| DLLHVC | DLL Interface for HVC Control SoftwareControl Software RS232 | dllhvc.pdf | ||||||
Series SHQ: Benchtop HV-Supplies |
||||||||
|---|---|---|---|---|---|---|---|---|
| SHQ1xx: Single channel versions | ||||||||
| Model | Output Voltage |
Outp. Current pro channel |
Ripple and Noise max. | LCD res. current |
LCD res. voltage |
Power req |
Datasheet | |
| SHQ 122M | 0 .. 2 kV | 0 .. 6 mA | < 2 mV pp | 1 nA | 100 mV | 230 V (opt. 110 V) | SHQ2xx.pdf | |
| SHQ 124M | 0 .. 4 kV | 0 .. 3 mA | < 2 mV pp | 1 nA | 100 mV | 230 V (opt. 110 V) | SHQ2xx.pdf | |
| SHQ 126L | 0 .. 6 kV | 0 .. 1 mA | < 5 mV pp | 1 nA | 100 mV | 230 V (opt. 110 V) | SHQ2xx.pdf | |
| SHQ2xx: Dual channel versions | ||||||||
| Model | Output Voltage |
Outp. Current pro channel |
Ripple and Noise max. | LCD res. current |
LCD res. voltage |
Power req |
Datasheet | |
| SHQ 222M | 0 .. 2 kV | 0 .. 6 mA | < 2 mV pp | 1 nA | 100 mV | 230 V (opt. 110 V) | SHQ2xx.pdf | |
| SHQ 224M | 0 .. 4 kV | 0 .. 3 mA | < 2 mV pp | 1 nA | 100 mV | 230 V (opt. 110 V) | SHQ2xx.pdf | |
| SHQ 226L | 0 .. 6 kV | 0 .. 1 mA | < 5 mV pp | 1 nA | 100 mV | 230 V (opt. 110 V) | SHQ2xx.pdf | |
Series THQ: Benchtop HV-Supplies |
||||||||
|---|---|---|---|---|---|---|---|---|
| THQ T1DPxx and T2DPxx: Single and dual channel versions in benchtop case | ||||||||
| Model | Output Voltage |
Outp. Current pro channel |
Ripple and Noise max. | LCD res. current |
LCD res. voltage |
Power req |
Datasheet | |
| THQ T1DPxx | 0 .. 6 kV | 0 .. 10 mA | < 7 mV pp | 1 nA | 100 mV | 230 V (opt. 110 V) | THQxx.pdf | |
| THQ T2DPxx | 0 .. 6 kV | 0 .. 10 mA | < 7 mV pp | 1 nA | 100 mV | 230 V (opt. 110 V) | THQxx.pdf | |
Top top  |